Window Tint Percentages Explained
A window tint percentage is the share of visible light that passes through the glass and film together, so a lower number means a darker window. In Kansas every side and rear window must stay at 35% or lighter, while Missouri allows any darkness behind the driver.
Tint Percentage Comparison
The number on a tint film is its VLT, or visible light transmission. It is measured on the finished window, film and factory glass combined, which is why we meter every install before the car leaves our Overland Park studio.
| Tint | What it looks like | Kansas | Missouri |
|---|---|---|---|
| 70% | Nearly clear. Heat and UV rejection without changing the look. | Legal on all windows | Legal on all windows |
| 50% | Light smoke. Subtle from outside. | Legal on all windows | Legal on all windows |
| 35% | Medium shade. The legal limit for front side windows in both states. | Legal on all windows | Legal on all windows |
| 20% | Dark “factory look.” Hard to see in from outside. | Not legal on any window | Legal behind the driver only |
| 5% | Limo tint. Nearly opaque from outside. | Not legal on any window | Legal behind the driver only |
Windshield tint in both states is limited to the strip above the AS-1 line. Read the full Kansas and Missouri tint laws for statutes, exemptions and penalties.
Darker Does Not Mean Cooler
Heat rejection comes from the film technology, not the shade. Old dyed films have to be dark to block any heat. Nano-ceramic films such as KAVACA Ceramic IR block up to 96% of infrared heat even at lighter, legal shades, and KAVACA Ultimate IR blocks up to 99%.
That means a Kansas driver can stay at 35% on every window and still get a cooler cabin than an illegal 20% dyed film would give. Compare every tier on our window tinting in Kansas City page.
How to choose
- Kansas plates: 35% or lighter on every window. Pick the film tier for heat rejection, not the shade for darkness.
- Missouri plates: 35% or lighter on the front sides; any darkness behind the driver.
- Factory privacy glass: film on top is measured with the glass, so it almost always lands below 35%.
- Night driving: lighter shades keep mirrors and side visibility clearer after dark.
How the KAVACA Tiers Compare at the Same Shade
Two windows can both meter 35% and feel completely different on a July afternoon. The shade controls how much visible light gets through. The film technology controls how much infrared heat gets through. That is why we talk about film tier and shade as two separate choices.
| KAVACA film | Infrared heat rejection (up to) | Where it fits |
|---|---|---|
| Carbon X | 80% | Carbon film with no metal, no dye and no signal interference |
| Ceramic X | 88% | Entry nano-ceramic, the step up from carbon |
| Ceramic IR | 96% | Premium nano-ceramic for strong heat control at legal shades |
| Ultimate IR | 99% | Elite Dealer exclusive, the highest heat rejection in the lineup |
Every KAVACA automotive film carries a lifetime warranty with no annual service required. Because heat rejection comes from the film, a Kansas driver can stay at 35% on every window and still get a noticeably cooler cabin by choosing a higher tier.
Windshield and Sunroof Notes
In both Kansas and Missouri, windshield tint is only allowed above the AS-1 line, the small mark near the top edge of most windshields. Inside that strip we can install film to cut sun glare on your morning and evening drive. For protection on the rest of the windshield, see Windshield Protection Film, a clear film that helps stop rock chips.
Glass roofs and sunroofs let in a lot of overhead heat, especially on newer SUVs and EVs. Ask us about film for that glass when you request a quote, and we will confirm the options for your vehicle.
01What does 35% window tint mean?
It means 35% of visible light passes through the window with the film installed. It is a medium shade and the legal limit for every side and rear window in Kansas.
02What is the darkest legal tint in Kansas?
35% on every side and rear window, including SUVs, trucks and vans. Windshield tint is only allowed above the AS-1 line.
03Is 20% tint legal in Missouri?
Yes, behind the driver. Missouri allows any darkness on rear side windows and the back glass, but the front side windows must stay at 35% or lighter.
04Does darker tint block more heat?
Not necessarily. Heat rejection depends on the film. A nano-ceramic film at 35% can block more infrared heat than a much darker dyed film.
05What tint percentage is most popular in Kansas?
35% is the most common choice for Kansas-plated vehicles because it is the darkest shade allowed on every side and rear window.
06Does a higher KAVACA tier make the window darker?
No. The shade you choose sets the darkness. The tier sets how much infrared heat the film blocks, from up to 80% with Carbon X to up to 99% with Ultimate IR.
07Can I tint my windshield in Kansas or Missouri?
Only above the AS-1 line near the top of the windshield. For rock-chip protection on the rest of the glass, ask about Windshield Protection Film.
